NOTE ON INSTALL:

REMOTE START IS NOT INCLUDED

 

Vehicles perimeters

All our Pandora systems are designed to work on almost any vehicle. But every vehicle manufacturer is different. On most installs, our systems talk digitally through the vehicles CANbus network or by adding external temperature sensors. The information read by the alarm system through the CANbus network won't always be exact. Therefore  in some small cases the fuel, temperature and other vehicle perimeters may not display on the Pandora app vehicle dependent. If they do display, most of the time we can adjust to be as close as we can to the true reading. Normally between 0-20% of the original vehicle reading itself. 

​

Vehicles factory OEM alarm systems.

Most modern cars are fitted with a factory immobiliser and/or alarm system. These alarms can be updated by the vehicle manufacturer at anytime when your vehicle goes in for a service or remotely at anytime through the SIM card built into the vehicles BCM. To gain control of the OEM alarm system on any vehicle fully, we sometimes need to use an external Pandora Module (POA) which controls your spare OEM remote. This then gives your Pandora system full control of your Factory settings, including on some vehicles mirror closure, dead locks, roof closure and control of the OEM arm and disarm. On some vehicles if the extra module is not used, you will still be able to arm the pandora and lock the vehicle through your OEM remote and the Pandora remote/app. However on some vehicles, You can disarm the Pandora and unlock the car remotely through the OEM remote, but not through pressing disarm on the Pandora control. Please ask your installer for more information on your vehicle. 

​

We have found the internal motion and warn away sensor only works on a number of vehicles. Some vehicles that are fitted with internal factory and aftermarket electrical devices can interfere with the sensor causing intermittent false alarms such as factory fitted wifi hotspots, tracking systems, DAB antennas, internet modems or dongles, security sensors and other aftermarket wireless devices including dash cams, tracking systems and LED lighting can cause interference to the sensor causing Intermittent false alarms. The sensor is included with all Pandora packages due to the internal motion feature of the sensor being needed for the thatcham approval meaning we will fit this sensor to your vehicle but switch off the external zone of the sensor as this is not required. If after the system is fitted and the sensor does false alarm with the external zone enabled, it will need to be disabled in the smartphone app. It is advised that you do not buy this alarm system solely for this sensor as it may not work on your vehicle and may need switching off.