Pandora Light Pro

V2

OLED remote with 128Bit encryption, 5.0 bluetooth Immobiliser tag & smartphone app

868MHz OLED DIGITAL FOB

Long range, Rechargable, dialogue encrypted 2-way OLED-display remote control that allows monitoring car parameters

Immobiliser tag allows, AntiHijack, 128 bit

dialogue encryption allows for secure use of OEM factory remote.

Bluetooth 5.0 Tag

New mobile applications for both Android and iOS devices. Pandora BT puts you in control of your car, giving you bluetooth control all from your smartphone or tablet.

Arm & disarm your Pandora system.

 

Start your vehicles engine with remote engine start.

 

Monitor important vehicle parameters such as engine tempurature, fuel level, battery voltage.

*Remote start not included.For remote start to work on your vehicle, pandora remote start will also need to be fitted at an extra cost. Engine temp and fuel readings are vehicle dependant. Not all vehicles will show all these readings

Pandora Pro BT app

PANDORA LIGHT PRO

The Pandora Light Pro is one of the securest car alarm systems in the world, with its state of the art 128bit dialogue encrypted OLED long range remote and immobiliser tag. No other

after market alarms system in the world offers this high encryption or technology in their systems remotes. In the wireless key hacking world we live in, you can an add as many engine immobiliser and sensors as you like to your car alarm! But if the thief can grab and control your remotes signal using the latest key hacking technology, used on our streets each night, they can simply switch your system and all the immobiliser off, with out even stepping foot inside your vehicle. The Pandora light pro not only protects your vehicle from the latest vehicle theft attacks, including OBD port key cloning, Key scanning and most importantly, Relay theft or RollJam. The light Pro still allows you to securely but most importantly conveniently control your vehicle using your factory remote. When the Pandora immobiliser tag is close to the car (range set by user) it allows you to still securely lock and unlock the vehicle using the factory remote, but fully protected by Pandora.  If the Tag isn't seen by the car alarm system, the Pandora Light pro and its secure engine immobiliser, will not disarm, keeping your vehicle secured and on the drive where you left it.

All our Pandora systems come with at least 4 additional sensors to give your car alarm the eyes and ears needed to protect your vehicle.

-Hard impact sensor with warn away - Detects hard impact to the vehicle.

-Movement sensor with accelerometer - Protects against vehicle towing or pushing

-Tilt sensor - Protects against wheel theft and car lifting

-Shock Sensor - Detects soft impact to vehicle 

All sensors can be adjusted from the Bluetooth smartphone app and the OLED long range remote.

NOTE ON INSTALL:

Remote start is not included as standard

Vehicles perimeters

All our Pandora systems are designed to work on almost any vehicle. But every vehicle manufacturer is different. On most installs, our systems talk digitally through the vehicles CANbus network or by adding external temperature sensors. The information read by the alarm system through the CANbus network won't always be exact. Therefore  in some small cases the fuel, temperature and other vehicle perimeters may not display on the Pandora app vehicle dependent. If they do display, most of the time we can adjust to be as close as we can to the true reading. Normally between 0-20% of the original vehicle reading itself. 

Vehicles factory OEM alarm systems.

Most modern cars are fitted with a factory immobiliser and/or alarm system. These alarms can be updated by the vehicle manufacturer at anytime when your vehicle goes in for a service or remotely at anytime through the SIM card built into the vehicles BCM. To gain control of the OEM alarm system on any vehicle fully, we sometimes need to use an external Pandora Module (POA) which controls your spare OEM remote. This then gives your Pandora system full control of your Factory settings, including on some vehicles mirror closure, dead locks, roof closure and control of the OEM arm and disarm. On some vehicles if the extra module is not used, you will still be able to arm the pandora and lock the vehicle through your OEM remote and the Pandora remote/app. However on some vehicles, You can disarm the Pandora and unlock the car remotely through the OEM remote, but not through pressing disarm on the Pandora control. Please ask your installer for more information on your vehicle. 

We have found the motion and warn away sensor only work on a number of vehicles. Some vehicles that are fitted with internal factory and aftermarket electrical devices can interfere with the sensor causing intermittent false alarms. Factory fitted DAB antennas, internet modems or dongles, security sensors and other aftermarket wireless devices including dash cams, can cause interference to the sensor causing Intermittent false alarms. The sensor is FREE with this package. Your installer will fit this sensor to your vehicle unless you choose not to. If after the system is fitted and the sensor does false alarm, it will need to be disabled in the smartphone app. Most of the time the false alarms are caused by the sensor being set too high. And simply turning it down through the smartphone app will stop most false alarms. However, It is advised that you do not buy this alarm system solely for this sensor as it may not work on your vehicle and may need switching off. 

Payment Methods

Contact us

Telephone: 07548650407

E-mail: jpautoservices25@gmail.com

©2020 by JP Auto Services

© All content on this site is owned by JP Auto Services, Do not copy any images or text without contacting us first.